- BA
Since we use gas hot water heaters for space heating in some of our Building America houses we thought it appropriate that we weigh in on the discussion relating to using gas hot water heaters for… Read More
- BA
Air flow measurements were taken for 7.6 m lengths of 12.7 cm through 22.9 cm diameter flexible ducts, with a 15.2 cm wall-cap, at duct pressures of -10 Pa to -120 Pa. Using these measurements and… Read More
- BA
A residential attic model, contained in the finite element computer program FSEC 3.0, was empirically aligned with measured attic data from three roof research facilities in Florida and Illinois.… Read More
Hot-Dry/Mixed-Dry
- BA
This research involved construction of a conditioned test hut in a cold climate (Climate Zone 5A) with multiple side-by-side instrumented roof rafter bays. This work examined seven experimental… Read More
Cold
- BA
The purpose of this report is to disseminate the findings from a needs assessment of issues related to attic insulation retrofits in manufactured homes that meet building codes specified by the U.S.… Read More
- BA
This research is a test implementation of an unvented tile roof assembly in a hot-humid climate (Orlando, FL; Zone 2A), insulated with air permeable insulation (netted and blown fiberglass). Given… Read More
Hot-Humid
- BA
This Technical Report describes the modeling of typical wall assemblies that have performed well historically in various climate zones. The provided information can be generalized for application to… Read More
- BA
This Measure Guideline describes how to model and interpret results of models for above grade walls. It analyzes the failure thresholds and criteria for above grade walls. A library of above-grade… Read More
- BA
There are many existing buildings with load-bearing mass masonry walls, whose energy performance could be improved with the retrofit of insulation. However, adding insulation to the interior side of… Read More
- BA
The measure guideline provides ventilation guidance for residential high performance mulitfamily construction that incorporates the requirements of the ASHRAE 62.2 2013 standard. The measure… Read More
Pagination
- Previous page
- Page 54
- Next page